grout haze remover

How To Remove Epoxy Grout Stains?

Epoxy grout is highly durable, waterproof, stain-resistant, and very simple to clean since it is constructed of a mixture of epoxy resin and filler particles. The product has been available for more than ten years and is frequently utilized in places with harsh weather. Epoxy grout is a tricky substance that is impermeable and mildew-resistant, but its toughness makes it challenging to remove once it dries. The good news is that eliminating epoxy grout from your tiles is possible. Grout haze remover helps to remove epoxy grout from your tiles without causing any damage if you use suitable materials and equipment. Here are some of the tips that help to remove epoxy grout stains which are explained below:

Remove the Grout:

You need to use a nylon scrubber and water to clean the grout. With some moisture and work, a thin layer of epoxy grout can be removed using grout haze remover. An epoxy stripper will be needed for thicker areas.

Ensure Adequate Ventilation:

To ensure you have enough ventilation, open the windows and turn on the exhaust fans. Wearing safety glasses and rubber gloves will protect your hands and eyes.

Use an epoxy remover:

Using a paintbrush, apply an epoxy stripper to the grout. Pour the epoxy stripper on the grout on horizontal surfaces, and apply it with a paintbrush. After dipping the brush into the liquid, and then brush a thick layer of epoxy stripper into the grout on vertical surfaces. Afoot epoxy strippers can be used directly out of the container without being diluted or mixed. To be sure, read the label before using the grout haze remover.

Hold off until the grout softens:

Give the grout a good 30 minutes to absorb the grout haze remover. Examine the grout using a putty knife or a wooden stick to determine if it has softened. Give it another 30 minutes if it still needs to fit enough for the utensil to reach the tile. It could take specific epoxy strippers two hours to soften the epoxy.

Disarm the Stripper:

First, you need to add 2 to 3 teaspoons of tri-sodium phosphate to 1 gallon of boiling water to create a solution. To neutralize the stripper, dispense the solution onto the tile. Next, dry the tiles with paper towels. Use a sponge to apply the solution to vertical surfaces.

Parting words:

You might need to perform minor repairs after your tiling has been thoroughly cleaned and is free of grout stains. Use some of the original grout to fill in the spaces if you accidentally removed more epoxy grout. Use Protection for more significant repairs, which will protect your tiling 50% longer than other grouts. This pen-shaped grout reviver gives a fresh lease of life to worn-out or discoloured grout.